900 Series Pop-up

900 Series Pop-Up

A straight flow valve has a patented open flow design. There are no 90 degree angles that the flow of water has to maneuver around. This allows for flow rates as far low as 1 GPH. The diaphragm inside does not cause hammering when closing like a typical valve.

902

Body Height: 4 1/4”
Pop-Up Height: 2”
Exposed Surface Diameter: 2-1/8”

903

Body Height: 5”
Pop-Up Height: 3”
Exposed Surface Diameter: 2-1/8”

904

Body Height: 6”
Pop-Up Height: 4”
Exposed Surface Diameter: 2-1/8”

905

Body Height: 8-1/2”
Pop-Up Height: 5”
Exposed Surface Diameter: 2-1/8”

906

Body Height: 9-1/2”
Pop-Up Height: 6”
Exposed Surface Diameter: 2 1/8”

906S

Body Height: 9-1/2”
Pop-Up Height: 6”
Exposed Surface Diameter: 2 1/8”
Side Inlet

912

Body Height: 15 ½”
Pop-Up Height: 12”
Exposed Surface Diameter: 2-1/8”
Side Inlet

Co-molded Wiper Seal

With “Leak-Stopper” gasket eliminating body/cap leak

Features

Unique integrally molded “Leak-Stopper” gasket prevents any body-cap leaks
Cap and seal utilize a “co-molded” design which provides internal support for the long term integrity of the wiper seal
High impact virgin ABS plastic construction of body, piston and cap
Patented Lateral discharging flush plug to aid installation
Heavy duty stainless steel retraction spring
Spring-loaded ratchet on all models for directional adjustment of spray pattern
Available with female (red flush plug) or male (green flush plug) threaded pistons

Operating Specifications

Operating pressure: 15-70 PSI, 25-70 PSI with CKV
Recommended working pressure: 30 PSI
Recommended working pressure with PRD: 30-70 PSI

Options Available

Check Valve (-CKV): holds up to 14 feet of head
*(904, 905, 906, and 912 only)
In stem pressure regulating device (-PRD)
– PRD-30 (30 PSI Outlet)
– PRD-40 (40 PSI Outlet)
– PRD-45 (45 PSI Outlet)
*(904, 905, 906, and 912 only)
Reclaimed purple cap (-R)

Dimensions

1/2” female pipe thread on bottom inlet
Male threaded piston to accept fixed or adjustable arc nozzles with female threads
Female threaded piston to accept fixed or adjustable arc nozzles with male threads