Dual Stage Lake / Pump Filter

The RainPro Lake/Pump Filters are dual staged with both an outer and inner filter designed for use on the intake side of a pump that is typically drawing from a pond or lake. The RainPro Lake/Pump Filters are manufactured of Heavy Duty PVC top and bottoms with rigid molded PVC inner and outer filtration walls. The hardware is all Stainless Steel.

PON-012

12″ Filter, 0-80 GPM, 2″ PVC fitting

PON-006

6″ Filter, 0-40 GPM, 2″ PVC fitting

Popular Configuration of PON-012 Filter

0-640 GPM

0-160 GPM

0-80 GPM

Features

PON-006

  • 6″ diameter
  • 38.8 square inches of open area
  • Inner 2″ molded diameter filter with 21.6 square inches of open area
  • 0-40 gallons per minute flow in clean water

PON-012

  • 12″ diameter
  • 82 square inches of open area
  • Inner 6″ molded diameter filter with 38.8 square inches of open area
  • 0-80 gallons per minute flow in clean water

Operating Specifications

  • Each Pon-012 filter added to system equates to an additional 80 GPM capacity. Centerline pipe must be sized to maximum flow desired.
  • All connections to filter use standard 2” slip PVC fittings, including; tees, ells, couplings, male or female threaded adapters, unions etc. This filter system provides you the most flexibility and cost effective means of assembling the filter design that meets your system requirements.
  • Each filter includes 2” slip PVC Schedule 40 threaded female adapter and a 2” slip PVC Schedule 40 cap.