• Ease and Cost of Installation – No Field Labor assembling manifolds
• Lowest manifold pressure loss – Save on Pumping Costs
• Low Profile Design – Minimize valve damage in field
• High Flow Valve for each individual line
• 100% Serviceable in the field

Straight Barb Loc Coupler

Socket Adapter

Socket Adapter 90° Elbow

High Flow MIP Valve

¾” Swivel Inlet with Barb Outlet or ¾” MHT Outlet

¾” Soc / 1” Spigot with Barb Outlet or ¾” MHT Outlet

¾” Swivel Inlet with Barb Outlet or ¾” MHT Outlet

Elbow Ball Valve with ¾” Soc / 1” Spigot Inlet and Tee Barb Outlet

Tee Ball Valve with ¾” Soc / 1” Spigot Inlet and Tee Barb Outlet or ¾” MHT Outlet

Ball Valve with ¾” FHT Swivel Inlet and Barb Outlet or ¾” MHT Outlet

Tee Ball Valve with ¾” FHT Swivel Inlet and Barb Outlet

Elbow Ball Valve with ¾” Soc / 1″ Spigot Inlet and Barb Outlet or ¾” MHT Outlet

Tee Ball Valve with ¾” SFHT Inlet and Tee Barb Outlet or ¾” MHT Outlet

Tee Ball Valves with ¾” Socket / 1″ Spigot Inlet and Tee Barb Outlets

Tee Ball Valves with ¾” Socket / 1″ Spigot Inlet with 1 Tee Barb Outlet and 1 ¾” MHT

Tee Ball Valves with ¾” Soc / 1” Spigot Inlet and Elbow Barb Outlets

Ball Valves with ¾” Socket / 1″ Spigot Inlet and 4 Barb Outlets or ¾” MHT Outlets + Flush Cap

Ball Valves with ¾” Socket / 1″ Spigot Inlet and 4 Barb Outlets or ¾” MHT Outlets + Flush Valve

Ball Valves with ¾” Swivel Inlet and 4 Barb Outlets or ¾” MHT Outlets + Flush Cap

Ball Valves with ¾” Socket / 1″ Spigot Inlet and 6 Barb Outlets or ¾” MHT Outlets + Flush Cap

Ball Valves with ¾” Socket / 1″ Spigot Inlet and 6 Barb Outlets or ¾” MHT Outlets + Flush Valve

Ball Valves with ¾” Swivel Inlet and 6 Barb Outlets or ¾” MHT Outlets + Flush Cap

¾” Socket / 1″ Spigot Inlet and 4 Barb Outlets or ¾” MHT Outlet + Flush Cap

¾” FHT Side Inlet and 4 Barb Outlets or ¾” MHT Outlets + Flush Cap

¾” FHT Side Inlet and 4 Ball Valve Barb Outlets or ¾” MHT Outlets + Flush Cap

Elbow Adapter with RSI4 Manifold
(4 Barb Outlets or ¾” MHT Outlets + Flush Cap)

Elbow Adapter with RV+RSI4 Manifold
(4 Barb Outlets or ¾” MHT Outlets + Flush Cap)

Elbow Adapter with RV+RSIV4 Manifold
(4 Barb Outlets or ¾” MHT Outlets + Flush Cap)

Elbow Adapter with RSIV4 Manifold
(4 Barb Outlets or ¾” MHT Outlets + Flush Cap)

¾” FHT Swivel Inlet and 2 Barb Outlets or ¾” MHT Outlets + Flush Cap

¾” Socket / 1″ Spigot Inlet and 2 Barb Outlets or ¾” MHT Outlets + Flush Cap

Ball Valve with ¾” Swivel FHT Inlet and 2 WYE Barb Outlets or ¾” MHT Outlets

2 WYE Barb Inlets or ¾” MHT with a Blank Outlet

2 Barb Ball Valves Inlets or ¾” MHT Inlets and ¾” Socket / 1″ Spigot Outlet

Barb Inlet or ¾” MHT Inlet and Blank Outlet

Figure “8” .600 x .700 End Closure

Figure “8” End Closure

Repair kit info here

Kit Includes: 2 Screws, Lock Nut*, Barb*, 2 O-Rings

Kit Includes: 2 Screws, Lock Nut, Barb, 2 O-Rings

Kit Includes: 2 Screws, Lock Nut, Barb, 2 O-Rings

1″ Socket x ¾” Socket / 1″ Spigot

Kit Includes: 2 Screws, 2 O-Rings, Ball w/ Top O-Ring, and Knob